Telecommunication Signal Network Surge Arresterr

X2B-24

1.Application This product is primarily applied to surge voltage protection for data buses and industrial control signal lines that transmit signals via two-wire shared floating ground with a rated operating voltage of 15VDC (maximum 17VDC).
2.Functional performance This product is primarily applied for surge voltage protection of data buses and industrial control signal lines that use two-wire shared floating ground transmission. It employs a two-stage protection (coarse and fine), featuring low residual voltage, to protect transmitters and receivers from damage caused by induced lightning or other transient overvoltages introduced through the signal lines.

3.Technical Parameters

Item Specification
Product Model X2B-24
Rated Operating Voltage 24VDC
Maximum Operating Voltage 28VDC
Maximum Working Current 450mA
Nominal Discharge Current 5kA (8/20μs)
Maximum Discharge Current 10kA (8/20μs)
Voltage Protection Level 50V (5kA, 8/20μs)
Maximum Transmission Power (Rate) 10Mbps
Insertion Loss ≤0.5dB
Series Resistance 2.29Ω
Port Wiring Capacity (Flexible Cable) 28~12AWG
Mounting Type 35mm DIN or 32mm High-Low Rail Mounting
Enclosure Protection Rating IP20
Enclosure Flame Retardant Rating UL94 V-0
Maximum Weight 70g
Common Mode Supported

4. Principle of Protection

Get In Touch With Us

Looking for low cost CNC machining parts with unparalleled quality? Send your inquiry or drawing fast to get an online CNC quote.​​​​​​​

Recommended

L63-05-MH
L63-05-MH
Application: The product is applied between two levels of surge protectors in power supply lines, The...
L35-05-MH
L35-05-MH
Application:The product is applied between two levels of surge protectors in power supply lines, replacing...
POE-MH
POE-MH
Application :The POE-MH network port surge protector is designed for the protection of network devices...
POE-4
POE-4
Application:The POE-4 network port surge protector is designed for the protection of network devices...
POE-3
POE-3
Application:The POE Ethernet Surge Protector is designed for the protection of network devices powered...
MHX1000RJ45-24(2U)
MHX1000RJ45-24
Application :A single-port surge protector is used to protect the output ports of Ethernet switches from...
MHX1000RJ45-1
MHX1000RJ45-1
Application: A single-port surge protector is used to protect the output ports of Ethernet switches from...
MHX600B75(K-J)
MHX600B75(K/J)
Application: This surge protector is used to protect BNC interface devices from damage caused by lightning-induced...
Scroll to Top