产品中心

MHT6000-N-1

By

Application：This product is primarily used for WLAN and WIMAX systems to protect them from damage caused by overvoltages such as use.induced lightning strikes introduced through antennas. It features waterproof functionality and is suitable for outdoor. Functional performance : This product is used in mobile communication system base stations operating in the 2.3~6.0GHz frequency band to protect them from overvoltage damage caused by induced lightning strikes introduced through antennas.

MHT6000-N-1 Read More »

L20-20-MH

By

Application：The product is applied between two levels of surge protectors in power supply lines, replacing the required wire length with an inductor to achieve the optimal matching between the upper and lower level surge protectors. Functional performance：The product uses hollow inductors, which eliminate magnetic saturation issues and provide good decoupling performance; it features a modular design with standard 35mm rail mounting, offering a compact size for easy installation.

L20-20-MH Read More »

JK-A220-D05-1

By

Application：This video surveillance surge protective device series is mainly used in video surveillance systems, effectively protecting equipment from damage caused by lightning, power lines, video signals and induced overvoltage. Functional performance：The product can protect cameras, monitors and power supply systems simultaneously, and features excellent protection against overvoltage in power supplies and signals.

JK-A220-D05-1 Read More »

M1L385-40Ⅱ（4P）

By

Application：This surge protector is primarily applied for surge protection against lightning or other transient overvoltages in low-voltage power supply TN-S systems. Functional performance ：The product is equipped with built-in overheat and overcurrent protection functions, providing Class C (Type II classification test) surge protection for low-voltage power distribution systems and electrical equipment. It adopts a 35-millimeter DIN rail mounting method, with the surge protection module being replaceable independently，for convenient installation and maintenance. The product is also fitted with a remote signaling alarm interface (dry contact) to facilitate remote monitoring of the surge protector status.

M1L385-40Ⅱ（4P） Read More »

HFLQ220-25-3

By

1.Application： This product is applicable for single-phase AC power supply instantaneous overvoltage protection systems. 2.Functional performance：This surge protector is a custom product designed according to customer requirements. It features high current handling capacity, low residual voltage, and modularity, with a fail-safe trip mechanism built into the modules.

HFLQ220-25-3 Read More »

POE-3

By

1.Application
The POE Ethernet Surge Protector is designed for the protection of network devices powered by Category 5e Ethernet cables. It is suitable for installation at interfaces between Lightning Protection Zones (LPZ1-LPZ3), ensuring that network devices are safeguarded against damage caused by overvoltages and overcurrents resulting from lightning strikes and industrial interference.

2.Functional performance
The POE Ethernet Surge Protector features two-level protection, including coarse and fine protection. It has characteristics such as high surge current capacity, low residual voltage, and small insertion loss. It is widely used for lightning protection of wireless bridge devices and is intended for indoor installation.

POE-3 Read More »

X5C-12

By

1.Product Description
This product is primarily used for surge voltage protection of data buses and industrial control signal lines that employ four-wire shared floating ground transmission. It adopts a two-stage protection scheme (coarse and fine), featuring low residual voltage. The protection safeguards transmitters and receivers from damage caused by induced lightning or other transient overvoltages introduced through the signal lines.

X5C-12 Read More »

X3C-15

By

1.Application
This product is primarily applied to surge voltage protection for data buses and industrial control signal lines that transmit signals via two-wire shared floating ground with a rated operating voltage of 15VDC (maximum 17VDC).

2.Functional performance
This product is primarily applied to surge voltage protection for data buses and industrial control signal lines that use two-wire shared floating ground transmission. It employs a two-stage protection scheme (coarse and fine) with low residual voltage, protecting transmitters and receivers from damage caused by induced lightning or other transient overvoltages introduced through the signal lines.

X3C-15 Read More »

X2B-24

By

1.Application
This product is primarily applied to surge voltage protection for data buses and industrial control signal lines that transmit signals via two-wire shared floating ground with a rated operating voltage of 15VDC (maximum 17VDC).

2.Functional performance
This product is primarily applied for surge voltage protection of data buses and industrial control signal lines that use two-wire shared floating ground transmission. It employs a two-stage protection (coarse and fine), featuring low residual voltage, to protect transmitters and receivers from damage caused by induced lightning or other transient overvoltages introduced through the signal lines.

X2B-24 Read More »

MHT6000-N-1

By

1.Application
This product is primarily used for WLAN and WIMAX systems to protect them from damage caused by overvoltages such as use.
induced lightning strikes introduced through antennas. It features waterproof functionality and is suitable for outdoor

2.Functional performance
This product is used in mobile communication system base stations operating in the 2.3~6.0GHz frequency band
to protect them from overvoltage damage caused by induced lightning strikes introduced through antennas.

MHT6000-N-1 Read More »

Founded in 2014 in Shenzhen, LAN TECH provides surge and over-voltage protection solutions, and supplies HPXIN surge protectors worldwide.

Menu

CONTACT US

Tel: 0086 0755- 32836398
Cellphone:+86 18682181068
Wechat：+86 18682181068
Email: info@szlansemi.com
Add:1st Building ,Diao Yu Tai industrial Park ,WeilingDa industry Zone,Dalang street,Long Hua New district, Shenzhen, Guangdong ,China 518109

Copyright © Shenzhen Lan Technology Co.,Ltd

Start typing and press enter to search

Scroll to Top